Below are some of the most commonly asked questions about the 90 Mini Mini Desk Lamp, if you cannot find the answer you need, please contact us here: submit a request
Does the lamp need to be plugged into a mains wall socket?
The lamp requires a power source via the micro USB, this can be via a mains adaptor (supplied with the UK version) or via any USB power source (minimum 500mA capacity)
Can it be plugged into my mobile phone USB charger or USB wall socket?
Is it rechargeable/does it have a battery?
No, it needs to be connected to a USB power source, it can be powered from a portable power bank (not supplied)
Can I plug the lamp it into my laptop?
Yes, using the cable supplied (USB A to USB Micro B)
What type of USB socket does it use?
USB Micro B input socket in the base
Does the lamp come fully assembled?
No, but assembly is simple in under a minute. There are three parts, shade, arm and base that all clip together and 2 small springs to fit, no tools are needed. Hex keys supplied are for fine-tuning the tension
Can I use my iPhone charging cable with the lamp?
No either use the cable supplied or another (USB A to USB Micro B)
Can I use a smart socket/switch to operate the lamp?
No, unfortunately the 90 Mini Mini can not be plugged into a smart socket/switch
Can I get a replacement bulb?
No, the LED module is built in to the lamp its expected life is 20,000 hours (so at 4 hours a day we would expect it to last in excess of 15 years). Should it fail, we will replace under our warranty, please make sure your register after purchasing - more details here Anglepoise Warranty
Can the lamp be dimmed?
Yes, by pressing and holding the on/off switch, the dimmed setting is retained whilst the lamp is connected to a USB power source and can be further adjusted by pressing and holding the on/off switch. Disconnecting and reconnecting power resets the lamp to full brightness. When connected to a power source and the source is shut off the lamp will also reset.
Can the lamp be mounted on a wall?
Yes, keyhole slots are provided in the base to allow for wall mounting, the customer would need to purchase suitable fixings for their wall. Friction joints may need to be tightened.
Can the lamp be used outside?
The lamp is designed for use indoors, in a dry environment. IP20 rated.
How much power does the lamp use?
4 Watts total when used from an independent USB power source, 5 Watts total when used with the plugin mains adaptor.
What is in the box?
Shade, Base and Arm set, Mains adaptor, 1.5 M USB A to Micro USB B cable, 2 x hex key (for adjustment), 2 x side springs, I x Instruction manual, 1 x Energy label.
What is the product made of?
All the main metal parts are anodised high-grade Aluminium, fixings and springs are plated steel, other parts are high quality moulded polycarbonate.
How should I clean it?
Wipe with a dry dusting cloth. Do not use cleaning agents.
How much does it weigh?
950g (2lbs) fully assembled
What is the light output, how bright is it?
470lm, equivalent to a 40W bulb, 3000k
What if it’s not holding position?
Tighten both the thumbwheels together a little. If it is still not holding, then make sure all hex key bolts are in place and pinching gently against each other, but not too tight.
My Anglepoise 90 Mini Mini is not working what should I do?
Ensure the arm is fully connected to the base and also fully inserted into the shade. Make sure the USB cable is connected correctly, both at the base and the power source. Check the power source is turned on - see this article for more help: My 90 Mini Mini is not working properly
If still not working, please contact us here: submit a request